VMC Machine Price in India

Updated 16 Nov 2026 · GST extra

Indicative ranges. Final price depends on spec and supplier.

VMC machine price list

New 3-axis VMC

  • Small, about 600 x 400 mm table

    Small parts, tool rooms

    Rs 17-30 lakh

  • Medium, about 1000 x 500 mm table

    The common job-shop size

    Rs 20-35 lakh

  • Large, 1100-1600 mm table travel in X

    Larger parts and moulds

    Rs 33-57 lakh

  • Medium, premium series from Indian makers

    Higher-spec series

    Rs 43-55 lakh

High-speed and drill-tap

  • 15,000-24,000 rpm, drill-tap class

    Small, fast, light cuts

    Rs 16-20 lakh*

  • Compact, BT30

    High-speed drilling and tapping

    Rs 20-43 lakh

  • Full-size high-speed series

    Fast cutting on full-size parts

    Rs 43-47 lakh*

New 5-axis VMC

  • Entry, India-built, rotary table on a VMC base, often 3+2

    Positions in 5 axes, cuts in 3

    Rs 25-60 lakh

  • Simultaneous 5-axis, trunnion table

    Cuts in all 5 axes at once

    Rs 87 lakh - 1.5 crore

  • Premium

    Top-end machines

    Rs 1.95-3.2 crore*

New HMC (horizontal)

  • 400 pallet

    From Rs 65 lakh*

  • 500 pallet

    Rs 68 lakh - 1.08 crore*

Add-on axes for a VMC

  • 4th-axis rotary table

    Rs 1.7-4 lakh

  • 5th-axis tilting rotary table

    Rs 3.5-7.5 lakh

Used VMC (dealer asking prices)

  • Indian make, under 5 years

    Rs 16-35 lakh

  • Indian make, 5-10 years

    Rs 7-26.5 lakh

  • Japanese make, 20+ years

    Rs 10-38 lakh

  • Taiwanese make, 20+ years

    Rs 6-27 lakh

PingB2B indicative price ranges, as of 16 Nov 2026. Final price depends on spec, controller, accessories and supplier; GST extra. Each range is for one machine. * Fewer listed prices behind this range, so treat it as a rough guide.

3-axis, 5-axis, HMC or used?

Choose by the parts you make.

3-axis VMCRs 17-57 lakh

Job shops and tool rooms; parts cut from the top.

It cuts in X, Y and Z. Most job shops and tool rooms start here. It has the widest range of sizes and prices on this page. Choose it if your parts can be cut from the top, or turned over between set-ups.

5-axis VMCFrom Rs 25 lakh

Complex shapes that need many set-ups on a 3-axis.

It adds two rotary axes. In a 3+2 machine, the table positions the part in 5 axes, but the cut happens in 3. A simultaneous 5-axis machine cuts in all 5 axes at once. Choose it for complex shapes that would need many set-ups on a 3-axis machine.

HMCFrom Rs 65 lakh

Repeat production batches on pallets.

It has a horizontal spindle and pallets. Choose it for repeat production batches, where pallets keep the spindle cutting while you load the next part. It costs more than a 3-axis VMC.

Used VMCRs 6-38 lakh

Lower entry cost; inspect before you pay.

It lowers the entry cost. A young Indian machine can ask close to the price of a new small VMC. An older machine costs much less. Compare warranty and service support, and have the machine inspected before you pay.

What decides VMC price

Check that quotes match on each of these.

Axis count
A 3-axis machine is the least costly. Adding a 4th or 5th axis raises the price, whether as an add-on table or a built-in 5-axis design.
Table size and travel
A larger table and longer axis travel cost more. Ask for the table size and the X, Y and Z travel in millimetres.
Spindle
Power and speed (rpm) change the price. High-speed spindles suit fast, light cuts.
Controller
The controller class and brand change the price. Ask every supplier to quote on the same controller.
Tool changer
An automatic tool changer (ATC) is standard on most VMCs. Check the number of tools it holds.
Accessories
Coolant systems, probes, chip conveyors and rotary tables are often quoted separately.
Make and origin
Indian-made and imported machines are priced differently. Premium series cost more.
New or used
Used machines are listed at lower prices. Age, make and condition decide how much lower.
GST
The ranges on this page exclude GST. Add GST to compare with a final quote.

How to buy a VMC machine

The more exact your request, the closer the quote.

What to send

  • New or used, and the quantity.
  • Parts you will make and the material.
  • Axis count: 3-axis, 4th-axis ready, or 5-axis.
  • Table size and X, Y, Z travel, if you know them.
  • Spindle speed and the tool-changer capacity you want.
  • Controller you prefer, if any.
  • Accessories: rotary table, coolant, probe, chip conveyor.
  • Your city, budget and when you need the machine.

The usual steps

  1. 1Send the request.
  2. 2Compare quotes on the same spec.
  3. 3Ask for a demonstration or a trial cut.
  4. 4Inspect the machine before dispatch.
  5. 5Plan installation, training and warranty terms, in writing from each supplier.

Need help buying?

Here’s how PingB2B works.

  1. Shortlist sellers

    Pick sellers as per your requirement.

  2. Quote comparison

    Same spec, prices you can compare.

  3. Pre-dispatch check

    We send photos before it leaves.

  4. Freight arranged

    We sort shipping and paperwork.

  5. Payment release

    You pay after approving the goods.

VMC price: questions

What is the VMC machine price in India?
As of 16 Nov 2026, a new 3-axis VMC costs Rs 17-30 lakh for a small table, Rs 20-35 lakh for a medium table and Rs 33-57 lakh for a large one. GST is extra. The final price depends on spec, controller, accessories and supplier. Suppliers quote on request.
What does a 5-axis VMC cost?
As of 16 Nov 2026, an entry 5-axis VMC built in India, often 3+2, is Rs 25-60 lakh. A simultaneous 5-axis machine with a trunnion table is Rs 87 lakh to Rs 1.5 crore. Premium machines are Rs 1.95-3.2 crore. GST is extra. Suppliers quote on request.
Is a new or used VMC better for a small shop?
As of 16 Nov 2026, a used Indian VMC under 5 years old is asked at Rs 16-35 lakh, close to a new small VMC at Rs 17-30 lakh. Older used machines cost less. Compare warranty and service support, and have any used machine inspected before you pay.
What controller should I choose for a VMC?
The controller is the machine's control system. Choose one your operators and programmers already know, and one with service support near your plant. The controller class changes the price. Ask every supplier to quote on the same controller, so the quotes can be compared.
What does a 4th or 5th axis add to a VMC price?
As of 16 Nov 2026, a 4th-axis rotary table adds about Rs 1.7-4 lakh to a VMC. A 5th-axis tilting table adds about Rs 3.5-7.5 lakh. These are add-on prices for a machine you already have or plan to buy. GST is extra. Suppliers quote on request.